20 Inch Bathroom Ceiling Light Manufacturer with DC Fan
This 20 inch bathroom ceiling light fixture combines a 36W dimmable LED with a 15W DC fan, six speeds, 3CCT lighting, and 2H/4H timer settings for B2B sourcing projects.
SKU: NE-RCFB10
| Product Type: | Flush Mount Ceiling Light with Integrated Fan |
|---|---|
| Fixture Diameter: | 20 Inch (50cm) |
| LED Power: | 36W LED |
| Motor: | 15W DC Motor |
| Fan Speeds: | 6 Speeds |
| Lighting: | 3CCT + Dimmable |
| Timer: | 2H / 4H |
| Installation: | Flush Mount |
| OEM/ODM: | Available after project review |
Flush Mount Lighting with Integrated Airflow
The bathroom ceiling light uses a low profile circular form to combine room lighting and adjustable airflow in one ceiling-mounted product. Its confirmed configuration includes a 36W LED, 15W DC motor, six fan speeds, 3CCT selection, dimmable brightness, and 2H/4H timer settings. Nebola supports distributors, retailers, contractors, and brand buyers with specification review, sampling, private labeling, packaging, and destination-market documentation. Bathroom placement must be checked against local electrical codes and the final product protection rating.
Confirmed Functions for Project Sourcing
Six clearly defined lighting, airflow, and timer functions help buyers evaluate NE-RCFB10 for residential, hospitality, retail, and private-label programs.
The integrated 36W LED provides the primary overhead light source within the compact circular fixture.
A 15W DC motor powers the integrated fan for adjustable airflow without a suspended fan body.
Six selectable speed settings allow airflow to be adjusted for different room conditions and user preferences.
The 3CCT function provides three selectable lighting tones for different times, tasks, and interior settings.
Adjustable brightness gives users greater control over general illumination and lower-light bathroom routines.
Two timer options support scheduled fan operation for two or four hours according to the selected setting.
- Product Specifications
- OEM & ODM
- Application & Compliance
NE-RCFB10 Technical Specifications
This bathroom ceiling light fixtures flush mount model combines a compact 20 inch body with integrated lighting and airflow. The table lists only the functions confirmed in the supplied product information. Electrical input, material, controller type, IP rating, certification, MOQ, lead time, and warranty require written confirmation for each project.
Item |
Confirmed Specification |
|---|---|
| Model / SKU | NE-RCFB10 |
| Product Type | Flush Mount Ceiling Light with Integrated Fan |
| Diameter | 20 Inch (50cm) |
| LED Power | 36W |
| Motor | 15W DC Motor |
| Fan Speeds | 6 Speeds |
| Color Temperature | 3CCT |
| Brightness | Dimmable |
| Timer | 2H / 4H |
| Installation | Flush Mount |
OEM and Private Label Development
Nebola supports brands, importers, wholesalers, retailers, and project suppliers with configuration review and private-label development. Customization is evaluated against engineering feasibility, order scope, target-market requirements, and sample approval. Unconfirmed options are not treated as standard product features.
Custom Item |
Project Scope |
|---|---|
| Appearance | Color and surface treatment after sample review |
| Lighting | LED and control requirements evaluated by engineering |
| Fan Controls | Speed and timer logic based on the approved configuration |
| Branding | Logo, labels, rating information, and manuals |
| Packaging | Neutral or private-label carton and inserts |
| Compliance Files | Support planned for the destination market |
Project Workflow
Requirement Confirmation → Configuration Evaluation → Sample Development → Functional Testing → Sample Approval → Packaging Confirmation → Mass Production → Quality Inspection → Shipment. MOQ, sample terms, and lead time are confirmed after the complete requirement review.
Bathroom Project Application Review
The low profile format can support compact residential, apartment, hotel, and renovation projects that require overhead light and adjustable airflow. Because no IP rating has been confirmed, installation must be limited to locations approved by the final specification, local electrical code, and a qualified installer.
Project Scenario |
Evaluation Point |
|---|---|
| Residential Bathroom | Confirm room zone, clearances, electrical code, and moisture rating |
| Hotel Bathroom | Review standardized wiring, maintenance access, and documentation |
| Apartment Project | Check ceiling structure, room size, and approved installation position |
| Retail Program | Confirm labeling, manuals, packaging, and destination-market files |
| Private Label Range | Complete sample approval before volume production |
Low Profile Fixture for Compact Ceilings
The 20 inch circular format keeps the light and fan close to the ceiling, helping project buyers plan compact interiors without a hanging fan assembly. The 36W LED provides integrated illumination, while the internal fan adds six adjustable speed settings. For bathroom-related projects, the installer must confirm the permitted room zone, electrical supply, ceiling structure, clearances, and protection rating. Nebola can review these requirements during specification and sample evaluation.
Adjustable Light and Airflow Settings
Model NE-RCFB10 combines three selectable color temperatures, dimmable LED brightness, six fan speeds, and two timer settings. This gives brands and project buyers a clear set of functions for product positioning and sample testing. The 15W DC motor and 36W LED ratings are confirmed in the supplied product information. Controller type, electrical input, memory behavior, and independent operating logic must be confirmed in the final specification.
OEM Support for Bathroom Lighting Buyers
Nebola works with importers, wholesalers, retailers, contractors, and brand owners on private-label bathroom ceiling light programs. Project support can cover configuration review, sample development, branding, labels, manuals, packaging, inspection, and export documentation. Functional or appearance changes are evaluated before sampling, and no unconfirmed feature is added to the specification. Buyers can submit their target market, estimated quantity, required functions, and packaging scope for a project-specific proposal.
More Flush Mount Fan Light Options
Compare additional compact fan light models for private-label ranges, residential projects, hospitality supply, and wholesale distribution.
Bathroom Ceiling Light Manufacturing for Compact Interior Projects
Nebola develops integrated lighting and airflow products for importers, distributors, retailers, contractors, and private-label buyers. Model NE-RCFB10 combines a 20 inch flush mount profile with a 36W LED light and a 15W DC fan motor. Its circular form is intended for projects that need overhead lighting and adjustable airflow without a suspended fan body. Product configuration, electrical requirements, installation conditions, and target-market documentation should be confirmed before ordering.
Factory Support for Bathroom Lighting Programs
Our production system supports standard supply, private label programs, and product development for international buyers. Engineering, sourcing, assembly, inspection, packaging, and export coordination are managed through a defined project workflow. For this bathroom ceiling light fixture, buyers can discuss appearance, lighting configuration, controller requirements, labeling, manuals, and retail packaging according to their destination market.
The factory operates approximately 18,000 square meters with more than 500 employees across production, engineering, quality, and management functions. These resources support sample evaluation and volume production for ceiling fan light programs. Final commercial terms, sample timing, minimum order quantity, and mass-production lead time are confirmed after the required configuration and packaging scope have been reviewed.
Production Process for Flush Mount Fan Lights
Production begins with confirmation of the approved specification, component list, visual requirements, and packaging plan. Materials and electrical parts are prepared before assembly, followed by in-process checks for fit, wiring, light operation, fan operation, and surface condition. The confirmed sample provides the reference for production and final inspection.
For model NE-RCFB10, functional checks should cover the 36W LED module, three selectable color temperatures, brightness adjustment, six fan speeds, the 15W DC motor, and the 2H/4H timer. Packaging and documentation are reviewed against the destination market and buyer requirements before shipment.
Compliance Planning by Destination Market
Electrical and installation requirements vary by country, sales channel, and project type. Before production, buyers should confirm the rated voltage, frequency, wiring method, controller configuration, labeling language, and any required test reports. Installation in bathrooms must also be evaluated against local electrical codes and the exact room zone.
No moisture-protection or IP rating has been confirmed for NE-RCFB10. The product should therefore not be described for wet zones, shower areas, or direct water exposure unless the final configuration and supporting test documents confirm suitability. Certification and testing support can be arranged based on the destination market and approved specification.
Inspection of Lighting, Fan and Timer Functions
Quality checks are organized around the approved sample and purchase specification. Incoming components are reviewed before assembly, while in-process inspection checks electrical connections, component positioning, housing fit, and visible finish. Finished units are tested for lighting, airflow controls, timer response, operating stability, and packaging completeness.
For this bathroom ceiling light, the functional inspection plan should verify each of the six fan speeds, all three color temperature settings, dimming response, 2-hour and 4-hour timer modes, LED illumination, and DC motor operation. Any market-specific safety test is handled according to the final electrical configuration and agreed documentation scope.
Quality Control Reference
The following checkpoints provide a practical framework for sample approval and production inspection. Detailed criteria, tolerances, sampling levels, and test duration should be agreed for each order. This allows importers and project buyers to align inspection with the product configuration and destination-market requirements.
Inspection Process |
Purpose |
|---|---|
| Incoming Components | Check specified electrical and structural parts before assembly |
| Housing Assembly | Confirm fit, alignment, fastening, and visible finish |
| LED Inspection | Verify 36W lighting, 3CCT selection, and dimming response |
| Fan Speed Test | Confirm all six airflow settings operate as specified |
| DC Motor Check | Review motor start, operation, and stability |
| Timer Test | Verify 2H and 4H timer commands |
| Appearance Review | Check the approved color, surface, and assembly condition |
| Packaging Inspection | Confirm accessories, labels, manuals, and transport protection |
Packaging and Export Coordination
Packaging is developed around the fixture dimensions, component protection needs, shipment method, and retail presentation. Buyers can request neutral cartons or private-label packaging, subject to artwork and material confirmation. Before shipment, the packing list, accessories, labels, manuals, carton marks, and product positioning are checked against the approved order.
Final lead time depends on the confirmed configuration, packaging, testing requirements, and order quantity. The project team coordinates production updates, pre-shipment inspection, export documents, and logistics information with the buyer.
Technical and After-sales Coordination
Project support can include specification confirmation, installation documentation, user manual preparation, product operation guidance, and issue analysis. The exact service scope and warranty terms are confirmed in the quotation or purchase agreement. Buyers should provide the target market, electrical standard, application conditions, estimated quantity, and required documents so the team can prepare an appropriate proposal.
OEM and Private Label Options
OEM and ODM support is available for brands, wholesalers, retailers, and project suppliers that need a differentiated bathroom ceiling light fixture. Development can cover visual finish, lighting specification, control logic, branding, manuals, carton artwork, and market-specific documentation. Any functional change is evaluated by engineering before sample production.
The process normally includes requirement confirmation, configuration review, sample development, testing, sample approval, packaging confirmation, mass production, inspection, and shipment. Timing and commercial terms are provided after the required customization level has been defined.
Customization Area |
Project Options |
|---|---|
| Appearance | Color and surface treatment subject to sample confirmation |
| Lighting | LED, color temperature, dimming, and control requirements |
| Fan Controls | Speed and timer logic evaluated for the target market |
| Branding | Logo, product label, rating label, and manual |
| Packaging | Neutral carton, retail artwork, inserts, and carton marks |
| Documentation | Installation information and market-specific file support |
| Samples | Configuration review, sample build, testing, and approval |
| Order Support | Production tracking, inspection coordination, and shipping documents |
Frequently Asked Questions About Bathroom Ceiling Lights
Model NE-RCFB10 combines a 20 inch flush mount bathroom ceiling light with a 36W LED module and a 15W DC fan motor. The confirmed functions include six fan speeds, three selectable color temperatures, dimmable brightness, and 2-hour or 4-hour timer settings. This integrated format is intended for buyers who want lighting and adjustable airflow in one compact ceiling fixture. Rated voltage, controller type, material, moisture protection, and other market-specific details should be confirmed with the final quotation and specification sheet.
The supplied product information confirms adjustable lighting, six fan speeds, and timer functions, but it does not confirm the exact controller or whether every function operates independently. Buyers should specify the required operating logic during project review. Nebola can evaluate the controller, receiver, wall-control, or other interface requirements for the destination market. The final sample and written specification should clearly identify light switching, dimming, 3CCT selection, fan-speed control, and timer behavior before mass production.
This bathroom ceiling light fixture is intended for flush mount installation in compact interior spaces that require overhead lighting and airflow. However, no IP or moisture-protection rating has been confirmed for NE-RCFB10. It should not be specified for shower zones, wet locations, or direct water exposure without supporting test documentation. A qualified installer should verify the ceiling structure, electrical supply, local code, bathroom zone, required clearances, and product rating before installation. Please contact our team for project-specific application review.
Yes. Nebola can evaluate private label and OEM programs for NE-RCFB10, including logo application, product labels, user manuals, carton artwork, and documentation for the intended market. Additional appearance or functional changes require engineering review and sample confirmation. Buyers should provide their branding files, target country, expected order quantity, preferred packaging, electrical requirements, and sales channel. The team will then confirm which changes are available, the sample process, commercial terms, and production plan.
Potential customization areas include appearance, surface finish, LED configuration, color-temperature logic, dimming behavior, fan-control settings, timer programming, labels, manuals, accessories, and packaging. Availability depends on the requested change, order scope, electrical configuration, and destination-market requirements. Unconfirmed options are not treated as standard features. For an accurate proposal, buyers should send a requirement list covering the intended application, branding, required functions, estimated quantity, target market, and sample evaluation criteria.
The minimum order quantity and sample conditions have not been confirmed for this specific configuration. They depend on whether the buyer selects the standard model, private labeling, packaging changes, or deeper functional customization. Sample cost and timing also depend on component availability and testing requirements. Please contact the Nebola team with the required specification, target market, branding scope, estimated quantity, and preferred delivery schedule. Project-specific MOQ, sample terms, and quotation details will be provided after review.
Final lead time depends on the confirmed configuration, packaging, testing requirements, and order quantity. A standard order and a customized bathroom ceiling light fixtures flush mount program may require different material preparation and validation steps. Production scheduling begins after the specification, sample, artwork, packaging, and commercial terms are approved. The project team can provide an estimated schedule during quotation and update the buyer as materials, assembly, inspection, and shipping preparation progress.
No product certification or IP rating has been confirmed in the supplied information for NE-RCFB10. Certification and testing support can be arranged according to the final electrical configuration, destination country, buyer requirements, and intended bathroom zone. Factory management certificates and product-level compliance documents should be reviewed separately. Buyers should identify the required voltage, frequency, installation standard, test reports, labeling rules, and market-entry documents before sample approval so the compliance scope can be evaluated accurately.